Disables the generation of an ICMP address-mask reply on one or all VLANs.
| name | Specifies a VLAN name. |
Disabled.
Disables the generation of an ICMP address-mask reply (type 18, code 0) when an ICMP address mask request is received. The default setting is disabled. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands.
The following example disables the generation of an ICMP address-mask reply on VLAN "accounting":
disable icmp address-mask vlan accounting
This command was first available in ExtremeXOS 10.1.
The default was changed to disabled in ExtremeXOS 11.0.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB