Configures the duration for which the switch temporarily enables multicast flooding when an EAPS topology change occurs.
| seconds | Specifies the period (in seconds) for which the switch enables multicast flooding. |
15 seconds.
The flooding duration configuration applies only when the temporary-flooding feature is enabled with the following command:
configure eaps multicast temporary-floodingThe following command configures the temporary-flooding feature duration for 30 seconds:
configure eaps multicast temporary-flooding duration 30
This command was first available in ExtremeXOS 12.1.2.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB