configure ces peer ipaddress static-pw

configure ces ces_name peer ipaddressipaddress static-pw [{transmit-label outgoing_pw_label} {receive-label incoming_pw_label}]

Description

Change labels for TDM Circuit Emulation Service over MPLS Static PW.

Syntax Description

ces_name

Specifies the circuit emulation service (CES).

ipaddress

Specifies an IP address.

static-pw transmit-label

Specifies the static pseudowire transmit label.

outgoing_pw_label

Specifies the outgoing static label. The outgoing_pw_label can be any value, and must match the peer‘s configured incoming PW label.

receive-label

Specifies the label that you apply to the static PW on egress .

incoming_pw_label

Specifies the egress label. The incoming_pw_label must be locally unique, and is allocated out of the static label space

Default

N/A.

Usage Guidelines

This command allows a network administrator to modify the current configuration of a PW for the specified ces_mpls_name. The incoming_pw_label must be locally unique, and is allocated out of the static label space. The outgoing_pw_label can be any value, and must match the peer‘s configured incoming PW label.

Example

The following command changes the PW name:

configure ces new_ces peer ipaddress 10.1.1.0/24 static-pw transmit-label new_pw  lsp lsp598

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on the E4G-200 and E4G-400 platforms.