Adds a default gateway to the routing table.
|
ipv6Gateway |
Specifies a VLAN gateway IPv6 address. |
|
metric |
Specifies a cost metric. If no metric is specified, the default of 1 is used. |
|
ipv6ScopedGateway |
Specifies a scoped gateway. |
|
vr_name |
Specifies the VR or VRF to which the route is added. |
If no metric is specified, the default metric of 1 is used. If you do not specify a VR or VRF, the current VR context is used.
Default routes are used when the router has no other dynamic or static route to the requested destination. A default gateway must be located on a configured IPv6 interface. Use the unicast-only or multicast-only options to specify a particular traffic type. If not specified, both unicast and multicast traffic uses the default route.
The following example configures a default route for the switch:
configure iproute add default 2001:db8::1234:5678
This command was first available in ExtremeXOS 10.1.
Support for IPv6 was added in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB