disable virtual-router

disable virtual-router vrf-name

Description

Disables a VRF.

Note

This command is only applicable for VRFs.

Syntax Description

vrf-name

Specifies the name of the VRF.

Default

Enabled.

Usage Guidelines

When you disable a VRF, the software does the following:

Disables Layer 3 protocols.
Marks static routes as inactive and removes them from the hardware forwarding tables.
Flushes the IP ARP and IPv6 neighbor-discovery caches.

Example

The following example disables VRF "vrf1":

disable virtual-router vrf1

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on BlackDiamond X8 series switches, BlackDiamond 8000 c-, xl-, and xm-series modules, and Summit X460, X480, X670, and X770 switches.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback