show management

show management

Description

Displays the SNMP and CLI settings configured on the switch and the SNMP statistics.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

The following management output is displayed:
  • Enable/disable state for Telnet, and SNMP access.
  • Login statistics.
    • Enable/disable state for idle timeouts.
    • Maximum number of CLI sessions.
  • SNMP community strings.
  • SNMP trap receiver list.
For ExtremeXOS 11.0 and later, the following management output is also displayed:
  • SNMP trap receiver source IP address.
  • SNMP statistics counter.
  • SSH access states of enabled, disabled, and module not loaded.
  • CLI configuration logging.
  • SNMP access states of v1, v2c disabled and v3 enabled.

    If all three types of SNMP access are enabled or disabled, SNMP access is displayed as either Enabled or Disabled.

For ExtremeXOS 11.1 and later, the following management output is also displayed:

  • Enable/disable state for RMON.
For ExtremeXOS 11.2 and later, the following management output is also displayed:
  • Access-profile usage configured via Access Control Lists (ACLs) for additional Telnet and SSH2 security.
For ExtremeXOS 11.6 and later, the following management output is also displayed:
  • CLI scripting settings
    • Enable/disable state.
    • Error message setting.
    • Persistence mode.

For ExtremeXOS 12.4 and later, the following management output is also displayed:

  • Dropped SNMP packet counter.
For ExtremeXOS 12.5 and later, the following management output is also displayed:
  • CLI prompting.
  • SNMP INFORM.

Example

The following command displays configured SNMP settings on a Summit X670 switch:

show management

The following is sample output from this command:

x670.49 # show management
CLI idle timeout                 : Disabled
CLI max number of login attempts : 3
CLI max number of sessions       : 8
CLI paging                       : Enabled (this session only)
CLI space-completion             : Disabled (this session only)
CLI configuration logging        : Disabled
CLI password prompting only      : Disabled
CLI scripting                    : Disabled (this session only)
CLI scripting error mode         : Ignore-Error (this session only)
CLI persistent mode              : Persistent (this session only)
CLI prompting                    : Enabled (this session only)
Telnet access                    : Enabled (tcp port 23 vr all)                                 
                                 : Access Profile : not set
SSH Access                       : ssh module not loaded.
Web access                       : Disabled (tcp port 80)                                 
                                 : Access Profile : not set
Total Read Only Communities      : 1
Total Read Write Communities     : 1
RMON                             : Disabled
SNMP access                      : Enabled                                 
                                 : Access Profile : not set
SNMP Compatibility Options       :   
    GETBULK Reply Too Big Action : Too Big Error   
    IP Fragmentation             : Disallow
SNMP Traps                       : Enabled
SNMP v1/v2c TrapReceivers        :    
    Destination         Source IP Address       Flags   Timeout  Retries   
   10.120.91.48 /162    32.1.0.2                2ET           -        -   
   10.120.91.48 /162    32.2.0.2                2ET           -        -
2001:2001:2001:2001:2001:2001:2001:2003 /162    2ET           -        -
2001:2001:2001:2001:2001:2001:2001:2001 /16200  
2001:2001:2001:2001:2001:2001:2001:2002         2ET           -        -
2001:2001:2001:2001:2001:2001:2001:2004 /16200  2ET           -        -
2334:0:0:0:0:0:0:2/11555                        2ET           -        - 

Flags:  Version: 1=v1 2=v2c 3=v3        
        Mode: S=Standard E=Enhanced        
        Notification Type: T=Trap I=Inform 

SNMP stats:     InPkts 11      OutPkts   11      Errors 0       AuthErrors 0                
                Gets   11      GetNexts  0       Sets   0       Drops      0
SNMP traps:     Sent   0       AuthTraps Enabled
SNMP inform:    Sent   0       Retries   0       Failed 0

History

This command was first available in ExtremeXOS 10.1.

The trap receiver source IP address, SNMP counter statistics, SSH access, CLI logging, and SNMP access states were added to the output in ExtremeXOS 11.0.

The enabled/disabled state for RMON was added to the output in ExtremeXOS 11.1.

Additional Telnet and SSH2 information about ACL usage was added to the output in ExtremeXOS11.2.

Information about CLI scripting including, the enabled/disabled state, error mode, and persistent mode was added to the output in ExtremeXOS 11.6.

The dropped SNMP packet counter (Drops) was added to the output in ExtremeXOS 12.4.

CLI prompting was added to the output in ExtremeXOS 12.5.

SNMP INFORM was added in ExtremeXOS 12.5.3.

Platform Availability

This command is available on all platforms.