configure mirror to port

configure mirror mirror_name {to [port port | port_list port_list | loopback port port ] {remote-tag rtag | port none}

Description

Updates or specifies the "to port" definitions for a named mirroring instance.

`mirror_name`	Specifies the mirror name.
port	Specifies the mirror output port.
port_list	Specifies the list of ports where traffic is to be mirrored.
loopback port	Specifies an otherwise unused port required when mirroring to a port_list. The loopback-port is not available for switching user data traffic.
`port`	Specifies a single loopback port that is used internally to provide this feature.
remote-tag	Specifies the value of the VLAN ID used by the mirrored packets when egressing the monitor port.
port	Specifies the port definition for the mirroring instance.
none	Specifies none for the to port definition.

Disabled.

Use this command to update, or specify the "to port" definitions for a named mirroring instance.

The following example configures a mirror instance to port 3, slot 4 :

configure mirror to port 3:4

This command was first available in ExtremeXOS 15.3.

This command is available on all platforms.

Published August 2016prev | next