Show the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.
| boundary | Specifies the boundary clock. |
| ordinary | Specifies the ordinary clock. |
| unicast-master | Specifies table of unicast masters. |
| vlan | VLAN. |
| vlan_name | VLAN name. |
| vlan all | Specifies all vlans. |
N/A.
Use this command to display the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.
The following command displays the unicast master table for all clock ports:
E4G-200.1 # show network-clock ptp boundary unicast-master vlan all VLAN Name IP Address Log Query gm1-lpbk 1.1.1.101 3 ptp-s1 22.55.0.2 3
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers (E4G-200 and E4G-400) and Summit X770.
Note
PTP commands can be used only with the Network Timing feature pack.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB