Shuts down PoE power currently provided to the specified slot.
| slot | Disables inline power to specified slot. |
Enable.
Disabling inline power to a slot immediately removes power to any connected PDs. By default, the capability to provide inline power to a slot is enabled.
Disabling a slot using this command does not change the power budgeted to a specified slot using the configure inline-power budget command; nor can that power be used by PDs connected to any other slot.
Note
You can set the reserved power budget to 0 for a slot if, and only if, you first issue this command.
On a stack if you do not specify a slot number, the command operates on all active nodes. This command operates only on nodes in the active topology.
The following command removes power to all PDs on slot 3:
disable inline-power slot 3
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE devices listed in Extreme Networks PoE Devices.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB