 configure cdp trust-extend ports
configure cdp trust-extend portsThis command configures trust mode support for the IP phone. This information will be sent to the IP phone from the ExtremeXOS switch by trust TLV.
| untrusted | Instructs attached IP phone to overwrite priority received from PC with configured CoS value. | 
| trusted | Instructs IP phone to trust the priority received from PC or the attached device. | 
| port_list | Port list separated by a comma or "-"; | 
Trusted.
The following example sets the trust TLV value as trusted for port 5 in the ExtremeXOS switch, which will be used by the IP phone to not change the priority received from the PC or attached device.
configure cdp trust-extend trusted ports 5
configure cdp trust-extend untrusted ports 5
This command was first available in ExtremeXOS 16.2.
This command is available on all platforms.
 Print
                        this page
Print
                        this page Email this topic
Email this topic Feedback
Feedback View PDF
View PDF Download EPUB
Download EPUB