Configures the 10G port in WAN PHY or LAN mode.
|
port_list |
Specifies one or more ports or slots and ports. |
|
lan |
Specifies LAN mode. |
|
wan-phy |
Specifies WAN PHY mode. |
LAN mode.
Use this command to configure either LAN or WAN PHY mode on a 10G port.
The following command configures the WAN PHY option on a 10G port:
configure ports 1:3 mode wan-phy
This command was available in ExtremeXOS 12.3.
This command is available on all 10G XFP ports only on Summit X480 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB