configure ports tdm idle-code

configure ports port_list tdm idle-code idle_code

Description

Configures the idle-code to be transmitted in the 4-bits telephony line signaling coding of the TDM channel (DS0 timeslots), when the channel is not connected.

Syntax Description

port_list

Specifies a port or group of ports.

tdm

Time Division Multiplexing.

idle-code

Idle code signaled when the timeslots of a port are not connected.

idle-code

Idle code value between 0 and 15 to be transmitted in the 4-bits telephony line signaling coding of the TDM channel. The default value is 15.

Default

The default idle-code is 15.

Usage Guidelines

If the line coding options configured are not compatible with the chosen TDM hierarchy, the following error message is printed, and the configuration is rejected:

Error: Idle Code cannot be configured on unframed TDM ports or on framed TDM ports with signaling disabled.

Example

E4G400#configure port 35 tdm idle-code 15

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the cell site routers (E4G-200 and E4G-400).