show openflow controller

show openflow controller {primary | secondary}

Description

Shows the OpenFlow controller configuration and status on the switch.

Syntax Description

primary Specifies the primary openflow controller.
secondary Specifies the secondary openflow controller.

Default

None.

Usage Guidelines

None.

Example

The following example displays the current configuration for the primary controller:

show openflow controller       
Controller       : Primary       
  Configured     : Yes                      
  Datapath ID    : abcdef0123456789        
  VR             : VR-Default       
  Mode           : out-of-band Active       
  Target         : tcp:10.1.1.1:6633       
  Status         : ACTIVE           SSL              : Disabled       
  Probe(secs)    : 30               Uptime(secs)     : 130       
  Rate Limit     : 1000             Burst Size       :  250       
  Packets Sent : 9                  Packets Received : 8       
Controller       : Secondary       
  Configured     : No       

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP feature, see the Feature License Requirements document.