configure ports tdm recovered-clock

configure ports port_list tdm recovered-clock {quality-level value}

Description

Configures the clock recovery on the specified TDM ports.

tdm	Time Division Multiplexing.
recovered-clock	Clock recovered from the port.
quality-level	Quality level of the clock (T1 default is QL_ST3, E1 default is QL_SEC).
`value`	Value of quality level.

The T1 default is QL_ST3, E1 default is QL_SEC.

Use this command to configure the clock recovery on the specified TDM ports.

E4G200#configure port 20 rdm recovered-clock quality-level QL_PRC

This command was first available in ExtremeXOS 15.1.

This command is available on the cell site routers (E4G-200 and E4G-400).

Published August 2016prev | next