Modifies the current configuration of a pseudowire.
| ces_mpls_name | Alphanumeric string that identifies the Circuit Emulation Service (CES) object in the MPLS name space. |
| ipaddress | IP address. |
| pw_id | Unique identifier for the pseudowire service. |
| lsp_name | LSP for the pseudowire. |
N/A.
This command allows a network administrator to modify the current configuration of a PW for the specified ces_mpls_name or vpws_name. If the pw_id is changed, the PW ID cannot match any other CES/VPWS service. Changing the PW ID forces the PW into initialization state and may be re-signaled. Changing the named LSP will modify the outbound tunnel LSP that is used to carry the PW. If the new named LSP is inactive, the switch signals a PW Status Code of (PSN Facing-TX Fault, Forwarding Preference-Standby) fault to the PW peer. If the none keyword is specified, the switch will use the tunnel LSP that follows the shortest routed patch to the peer IP address.
Example output not yet available and will be provided in a future release.
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers (E4G-200 and E4G-400).
Print
this page
Email this topic
Feedback
View PDF
Download EPUB