Configures the framing type for the specified WAN PHY port.
|
port_list |
Specifies one or more ports or slots and ports. |
|
sonet |
Specifies the port framing type as SONET. |
|
sdh |
Specifies the port framing type as SDH. |
SONET.
Each WAN PHY port can be configured for framing that complies with either the SONET standard or the SDH standard. (SONET is primarily a U.S. standard, and SDH is the international version.)
XFP ports must be in WAN PHY mode. To configure the mode, use the configure ports port_list mode {lan | wan-phy} command.
The following command configures an LW XENPAK WAN PHY port to use SONET framing:
configure ports 1:3 wan-phy framing sonet
This command was available in ExtremeXOS 11.6.
This command is available on all 10G ports on 10G XFP ports only on Summit X480 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB