configure inline-power detection ports

configure inline-power detection [802.3af-only | legacy-and-802.3af | bypass] ports port_list

Description

This command configures PoE device detection mode for Summit and SummitStack. Summit platforms support per-port basis configuration.

Syntax Description

802.3af-only	IEEE 802.3af detection only.
legacy-and-802.3af	Capacitive and IEEE 802.3aqf detection.
bypass	No detection phase.
`port_list`	Port list separated by a comma or - .

Default

N/A.

Usage Guidelines

None.

Example

X460G2-24p-G4.4 # show inline-power configuration ports 1-2
Port   Config   Operator  Limit  Priority   Detection           Label
1      Enabled     30000  mW     Low        802.3af-only
2      Enabled     30000 mW      Low        legacy-and-802.3af

History

This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on all Summit and SummitStack platforms.

Published August 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback