Displays the dynamic ACL counters.
| countername | Display the counter. |
| any | Specifies the wildcard ACL. |
| port_list | Specifies which ports‘ ACLs to display. |
| vlan_name | Specifies which VLAN‘s ACL to display. |
| ingress | Display ingress ACLs. |
| egress | Display egress ACLs (BlackDiamond X8 series switches, BlackDiamond 8000 c- or xl-series modules, E4G-200 and E4G-400 switches, and Summit X480 series switches only). |
The default is to display all interfaces, ingress.
None.
The following command displays all the dynamic ACL counters:
show access-list dynamic counter
This command was first available in ExtremeXOS 11.3.
This command is available on all platforms.
The egress option is available on BlackDiamond X8 series switches, BlackDiamond 8000 c- xl-, and xm-series modules, E4G-200 and E4G-400 switches, and Summit X460, X480, X670, and X770 series switches only.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB