Enables the DiffServ field of an IP packet to be examined in order to select a QoS profile.
| port_list | Specifies a list of ports or slots and ports to which the parameters apply. |
| all | Specifies that DiffServ examination is enabled for all ports. |
Disabled.
The Diffserv examination feature is disabled by default.
If you are using DiffServ for QoS parameters, we recommend that you also configure 802.1p or port-based QoS parameters to ensure that high-priority traffic is not dropped prior to reaching the MSM/MM on modular switches.
enable diffserv examination ports 1:1,5:5,6:2
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB