show power led motion-detector

Description

Displays the status of the motion detector on the Summit X670 switch.

This command has no arguments or variables.

N/A.

Use this command to display the status and timeout setting of the motion detector.

The following command displays the status for motion detection on the switch:

show power led motion-detector

The following is sample output from this command:

X670-48x.1 # show power led motion-detector
Motion detector          : Enabled
Timeout                  : 180 seconds

This command was first available in ExtremeXOS 12.6.

This command is available on the Summit X670 switch only.

Published August 2016prev | next