Displays information about neighbors.
| detail | Displays detailed information. |
N/A.
Use this command to display CDP neighbor information.
The following command displays neighbor information for the CDP feature:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show cdp neighbor
12345678901234567890123456789012345678901234567890123456789012345678901234567890
Device Id Local Hold Capability Platform Port Id
Interface Time
--------------------------------------------------------------------------------
Eni-Extreme-x440-sw> 1 150 T X440-24t-10G Slot: 1, P>
00:04:96:8B:9D:B0 2 171 T X440-48t Slot: 1, P>
00:04:96:8B:C1:ED 7 134 T X460-48t Slot: 1, P>
---------------------------------------------------------------------------------
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge,
S - Switch, H - Host, I - IGMP, r - Repeater
# show cdp neighbor detail
12345678901234567890123456789012345678901234567890123456789012345678901234567890
---------------------------------------------------------------------------
Device ID : Eni-Extreme-x440-switch-1
Port ID (outgoing port) : Slot: 1, Port: 1
Advertisement Version : 2
IP Addresses : 10.10.10.2
Platform : X440-24t-10G
Interface : 1
Holdtime : 173
Version :
ExtremeXOS version 15.7.0.22 fixes_v1570b9 by kosharma
on Tue Feb 24 11:53:33 IST 2015
Native VLAN : 1
Duplex : Full
SysName : X440-24t-10G
Location : Chennai
Power Request Id : 24333
Power Management Id : 2
Power Drawn : 1500 mW
Power Consumed : 3454 mW
Note
">" indicates that the value was truncated to the column size in the output. Use the detail option to see the complete value.This command was first available in ExtremeXOS 15.4.
The output of this command was updated in ExtremeXOS 16.2
This command is available on all platforms.