This command is used to add an FCF to a FIP Snooping VLAN port when in manual fcf-update mode.
If the fcf-update mode is manual, this command adds a new FCF MAC to the list of FCFs. The command does not allow the same FCF MAC to be added to multiple ports in the same VLAN.
When a new FCF is added, ACLs are added to accept FIP frames from the new FCF.
An FCF can only be configured on a FIP Snooping VLAN port that has port location FCF-to-Enode or All configured.
If the fcf-update mode is automatic and this command is executed, the add is not allowed and the user is informed.
| fip | FCoE Initialization Protocol. |
| snooping | Snooping on FIP frames. |
| vlan_name | Name of a FIP Snooping VLAN where fcf-update is configured to be in manual mode. |
| add | Add to the list of FCoE forwarders. |
| mac_addr | MAC address of the FCoE Forwarder specified in the format of hh:hh:hh:hh:hh:hh. |
| port | Port through which the FCF is reachable. |
N/A.
This command is used to add an FCF to a FIP Snooping VLAN port when in manual fcf-update mode. The command does not allow the same FCF MAC to be added to multiple ports in the same VLAN.
configure fip snooping v3 add fcf aa:bb:cc:dd:00:00 port 1:2
This command was first available in ExtremeXOS 15.1.
BlackDiamond X8
BlackDiamond 8800 series BD8900-40G6X-c
Summit X670
Summit X770
Print
this page
Email this topic
Feedback
View PDF
Download EPUB