configure ospfv3 delete virtual-link

configure ospfv3 delete virtual-link {routerid} router_identifier {area} area_identifier

Description

Deletes a virtual link connected to another ABR.

Syntax Description

router_identifier Specifies the router ID of the other end of the link.
area_identifier Specifies the transit area identifier, a four-byte, dotted decimal number.

Default

N/A.

Usage Guidelines

A virtual link provides a logical path between the ABR of the disconnected area and the ABR of the normal area that connects to the backbone. A virtual link must be established between two ABRs that have a common area, with one ABR connected to the backbone. Specify the following:
  • Router-identifier—Far-end router identifier, a four-byte, dotted decimal number.

  • Area-identifier—Transit area used for connecting the two end-points. The transit area cannot have the area identifier 0.0.0.0. and cannot be a stub area or an NSSA.

Example

The following command deletes a virtual link with router ID 10.1.2.1 through the transit area 10.1.0.0:

configure ospfv3 delete virtual-link 10.1.2.1 10.1.0.0

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.