Displays inline power status information for the specified PoE switch.
This command has no arguments or variables.
N/A.
The output varies depending on the PoE device you are using.
The following command displays inline power status for the switch:
show inline-power
Following is sample output from this command for the Summit X460-24p switch switch:
Inline Power System Information Configured : Enabled Power Usage Threshold : 70 percent Firmware Status Power (Watts) Power (Watts) Legacy Operational 405 W 0 W Disabled
This command was first available in ExtremeXOS 11.1.
This command is available on the Summit family switches listed in Extreme Networks PoE Devices in the ExtremeXOS User Guide.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB