This command is used to remove an FCF from a FIP Snooping VLAN port when in manual fcf-update mode.
If the fcf-update mode is manual, this command removes the FCF MAC from the list of FCFs configured on the FIP Snooping VLAN. When an FCF is removed from the list, the ACLs referencing the FCF (including virtual links) are removed.
If the fcf-update mode is automatic and this command is executed, the remove is not allowed and the user is informed.
| fip | FCoE Initialization Protocol. |
| snooping | Snooping FIP frames. |
| vlan_name | Name of a FIP Snooping VLAN where the specified FCF MAC address has been configured. |
| delete | Delete from the list of FCoE forwarders. |
| fcf | The list of FCoE forwarders in the VLAN. |
| mac_addr | MAC address of the FCoE Forwarder specified in the format of hh:hh:hh:hh:hh:hh. |
| port | Port through which the FCF is reachable. |
N/A.
This command is used to remove an FCF from a FIP Snooping VLAN port when in manual fcf-update mode. The fcf-update mode must be “manual”.
configure fip snooping v3 delete fcf aa:bb:cc:dd:00:00 port 1:2
This command was first available in ExtremeXOS 15.1.
BlackDiamond X8
BlackDiamond 8800 series BD8900-40G6X-c
Summit X670
Summit X770
Print
this page
Email this topic
Feedback
View PDF
Download EPUB