enable network-clock ptp unicast-negotiation

enable network-clock ptp [boundary | ordinary] unicast-negotiation {vlan} vlan_name]

Description

Enable unicast negotiation property in the specified clock port. The unicast negotiation enabled clock port responds to the unicast signaling requests from other clock slaves.

Syntax Description

boundary Boundary clock.
ordinary Ordinary clock.
vlan_name VLAN name.

Default

N/A.

Usage Guidelines

The unicast negotiation feature is currently not supported, and this command is retained to provide configuration compatibility to previous releases.

Example

Example output not yet available and will be provided in a future release.

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the cell site routers (E4G-200 and E4G-400) and Summit X770.

Note

Note

PTP commands can be used only with the Network Timing feature pack.