Restarts the MPLS process when it does not respond to the CLI commands.
| slot | Specifies the MSM/MM where process should be terminated and restarted. “A” specifies the MSM/MM installed in slot A, and “B” specifies the MSM/MM installed in slot B. |
N/A.
None.
The following command restarts the MPLS process:
restart process mpls
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB