Displays the specified TDM service interface information.
|
tdm |
Time Division Multiplexing. |
|
service |
Provider provisioned TDM service. |
|
circuit |
TDM circuit service. |
|
service_name |
TDM service name. |
N/A.
Use this command to display the TDM service interface information.
Switch.1 # show tdm service Service CES PW Flags Name Name ================================================================================ serBun10 cesop10 EAt----- serBun11 satop11 DRt----- ================================================================================ Flags: (A) Active, (D) Admin Disabled, (E) Admin Enabled, (R) Ready, (t) TDM Circuit Number of TDM Service(s): 2 Switch.1 # show tdm service circuit TDM Circuit Service Name: serBun10 Admin State : Enabled Oper State : Enabled Seized Code : 0xa Trunk Conditioning : 0xc8 Framing : Unframed Idle Pattern : 0xff Ports : 39* CES PW Name : c1 Flags: (*) Active TDM Circuit Service Name: serBun11 Admin State : Enabled Oper State : Disabled Seized Code : 0xa Trunk Conditioning : 0xc8 Framing : Unframed Idle Pattern : 0xff Ports : 31 CES PW Name : satop11 Flags: (*) Active
This command was first available in ExtremeXOS 15.1.
This command is available on the cell site routers (E4G-200 and E4G-400).
Print
this page
Email this topic
Feedback
View PDF
Download EPUB