show snmp traps bfd

Description

This command displays session up/down trap reception for BFD.

snmp	Configure SNMP specific settings.
traps	Configure SNMP Trap generation settings.
bfd	BFD-specific traps.

Not applicable.

Use this command to display SNMP trap reception for BFD session up/down.

The following command displays SNMP Trap configuration for BFD:

#show snmp traps bfd
SNMP Traps for Session Down    : Enabled
SNMP Traps for Session Up      : Enabled
SNMP Traps Batch Delay         : 1000 ms

This command was first available in ExtremeXOS 15.5.

This command is available on all platforms.

Published August 2016prev | next