configure rip vlan txmode

configure rip [vlan vlan_name | all] txmode [none | v1only | v1comp | v2only]

Description

Changes the RIP transmission mode for one or all VLANs.

Syntax Description

vlan_name Specifies to apply settings to a specific VLAN name.
all Specifies all VLANs.
none Specifies to not transmit any packets on this interface.
v1only Specifies to transmit RIP version 1 format packets to the broadcast address.
v1comp Specifies to transmit RIP version 2 format packets to the broadcast address.
v2only Specifies to transmit RIP version 2 format packets to the RIP multicast address.

Default

N/A.

Usage Guidelines

None.

Example

The following command configures the transmit mode for the VLAN finance to transmit version 2 format packets to the broadcast address:

configure rip finance txmode v1comp

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge, Advanced Edge, or Core license.