Informs the HW which fields to consider for Pseudo Wire LSP sharing hashing.
| destination-only | Specifies that you only use the destination IP address. |
| L3-and-L4 | Specifies that you use source and destination IP addresses, and layer 4 ports (default). |
| source-and-destination | Specifies that you use the source and destination IP addresses. |
| source-only | Specifies that you only use the source IP address only |
L3-and-L4.
Use this command to inform the hardware which fields to consider for Pseudo Wire LSP sharing hashing.
This command was first available in ExtremeXOS 15.4.
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB