Use this command to change the virtual router on which NTP is configured (that is, enabled).
| vr-name | Name of the virtual router. |
NTP is configured on VR-Default by default.
NTP can be enabled on only one virtual router at once.
You must disable NTP globally before configuring NTP on another virtual router.
The following example configures NTP on the virtual router "vr-acme":
configure ntp vr vr-acme
This command was first available in ExtremeXOS 15.7.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB