Configures the time-out for idle console, SSH2, and Telnet sessions.
| minutes | Specifies the time-out interval, in minutes. Range is 1 to 240 (1 minute to 4 hours). |
The default time-out is 20 minutes.
This command configures the length of time the switch will wait before disconnecting idle console, SSH2, or Telnet sessions.
The idletimeout feature must be enabled for this command to have an effect (the idletimeout feature is enabled by default).
The following command sets the time-out for idle login and console sessions to 10 minutes:
configure idletimeout 10
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB