configure ports l2pt profile

configure [vlan | vman] vlan_name ports port_list l2pt profile [none | profile_name]

Description

Configures L2PT profiles on service interfaces.

vlan	Specifies the VLAN configuration.
vman	Specifies the VMAN configuration.
`vlan_name`	Specifies the VLAN name.
ports `port_list`	Specifies the port and port list separated by a comma ( , ) or dash ( - ).
profile	Specifies the L2PT profile for the ports.
none	Specifies that no L2PT profile should be bound to the ports (default).
`profile_name`	Specifies the L2PT profile to be bound to the ports.

Disabled.

Use this command to configure L2PT profiles on service interfaces.

The following example binds my_l2pt_prof with ports 2 and 5 of VMAN cust1:

configure vman cust1 ports 2,5 l2pt profile my_l2pt_prof

The following example binds my_l2pt_prof with ports 2 and 5 of VMAN cust1. Port 5 is not a part of VMAN cust1:

configure vman cust1 ports 2,5 l2pt profile my_l2pt_prof
Error: Port 5 is not part of the service.

This command was first available in ExtremeXOS 15.5.

This command is available on all platforms.

Published August 2016prev | next