configure ces dscp

configure ces ces_name dscp dscp_value


Configures the DSCP code-point value to be filled in the packets sent over the PSN tunnel of the Circuit Emulation Service pseudowire.

Syntax Description

ces_name Alphanumeric string identifying the CES pseudowire.
dscp_value DSCP value to be advertised for this pseudowire, where the value can be between 0 and 63 (default is 63).


The default DSCP code-point value is 63.

Usage Guidelines

Note the following error message:

Error: DSCP code-point value cannot be configured for MEF8 or MPLS transported CES pseudo-wires.


config ces ces1 dscp 32


This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the cell site routers (E4G-200 and E4G-400).