Enables gPTP on one or more ports.
| port_list | Specifies one or more of the switch‘s physical ports. |
| all | Specifies all of the switch‘s physical ports. |
Disabled.
Use this command to configure on which ports gPTP runs. gPTP does not run on any ports if it is not first enabled in the switch by the enable network-clock gptp command.
enable network-clock gptp ports 4
This command was first available in ExtremeXOS 15.3.
This command is available on Summit X430, X440, X460, and X670 switches if the AVB feature pack license is installed on the switch.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB