configure radius-accounting retries

configure radius-accounting {mgmt-access [primary | secondary] | netlogin [primary | secondary] | index} retries retries

Description

This command is used to set the number of retries the switch will attempt. This value may be global or on a per server basis.

mgmt-access	RADIUS authentication for management access
netlogin	RADIUS authentication for netlogin access.
primary	Primary server.
secondary	Secondary server.
`index`	RADIUS server index.
retries	RADIUS server retries.
`retries`	RADIUS sever retries. Range 1-20.

The default value is 3, with a range of 0-10.

None.

This command was first available in ExtremeXOS 16.1.

This command is available on all platforms.

Published August 2016prev | next