Delete a PTP clock instance.
| boundary | Delete the boundary clock instance. |
| ordinary | Delete the ordinary clock instance. |
| end-to-end-transparent | Delete the End-to-End transparent clock instance. |
Use this command to delete a PTP boundary, ordinary, or end-to-end transparent clock instance. We recommend that you delete the ordinary or boundary clock instance before you delete the end-to-end transparent clock instance.
The following commands delete an ordinary clock, boundary clock and end-to-end transparent clock:
delete network-clock ptp ordinary delete network-clock ptp boundary delete network-clock ptp end-to-end-transparent
This command was first available in ExtremeXOS 15.1.
The ordinary clock parameter was added in ExtremeXOS 15.1 Revision 2.
This command is available on the cell site routers (E4G-200 and E4G-400) and Summit X460-G2, X670-G2, and X770.
Note
PTP commands can be used only with the Network Timing feature pack.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB