configure ospfv3 area delete range

configure ospfv3 area area_identifier delete range ipv6netmask [inter-prefix | nssa]


Removes a range of IP addresses in an OSPFv3 area to be aggregated.

Syntax Description

area_identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
ipv6netmask Specifies an IPv6 address / prefix length.
inter-prefix Inter-area prefix LSA.
nssa Not-so-stubby area.


No OSPFv3 inter-area-prefix LSAs are configured.

Usage Guidelines

If you attempt to delete a range that was not configured, you will receive an error message.


The following command is used to delete a summary network from area

configure ospfv3 area delete range 2aaa:456:3ffe::/64


This command was first available in ExtremeXOS 11.2.

Support for NSSA added in ExtremeXOS 16.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.