configure cfm segment dot1p

configure cfm segment segment_name dot1p dot1p_priority

Description

Configures the priority for the segment.

`segment-name`	An alpha numeric string identifying the segment name.
`dot1p_priority`	Priority value that is set in the DMM/DMR. The range is 0 to 7.

The default is 6.

Use this command to configure the dot1p priority that a DMM/DMR frame can get.

The following example configures a dot1p priority of 3 for segment s2.

configure cfm segment s2 dot1p 3

This command was first available in ExtremeXOS 12.3.

This command is available on all platforms.

Published August 2016prev | next