Configures a VMAN to use a specific protocol filter.
| vman_name | Specifies a VMAN name. |
| vman_list | Specifies a VMAN list. |
| protocol | Specifies a protocol filter. |
| filter | Specifies a protocol filter. |
| filter_name | Specifies a protocol filter name. |
N/A.
Use this command to configure a VMAN to use a specific protocol filter.
These devices do not forward packets with a protocol-based VLAN set to AppleTalk. To ensure that AppleTalk packets are forwarded on the device, create a protocol-based VLAN set to “any” and define other protocol-based VLANs for other traffic, such as IP traffic. The AppleTalk packets pass on the “any” VLAN, and the other protocols pass traffic on their specific protocol-based VLANs.
The following example configures the protocol filter “my_filter” to vlan v1:
configure vlan v1 protocol my_filter configure vlan v1 protocol filter my_filter
This command was first available in ExtremeXOS 10.1.
The filter keyword was added in ExtremeXOS 15.5.
The vman_list variable was added in ExtremeXOS 16.1.
This command is available on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB