show nodealias
Description
This command shows basic information collected by the Node Alias feature. Node Alias discovers information about the end systems on a per-port basis. Information from packets from end systems, such as VLANID, source MAC address, source IP address, protocol, etc. are captured in a database that can be queried.
Syntax Description
This command has no arguments or variables.
Default
None.
Usage Guidelines
The following information about the Node Alias feature appears:
- Max Entries—Total number of the entries learned through the Node Alias feature on the switch.
- Active Entries—Number of the active entries learned through the Node Alias feature on the switch.
- Purge Time—Last time an entry was purged from the Node Alias table on the switch.
- State—State of the Node Alias table on the switch.
- Protocols Enabled—Lists the currently enabled protocols that Node Alias detects.
- Ports Enabled—Lists the currently Node Alias-enabled ports with each port's active and maximum (configured using configure nodealias ports [port_list |all] maxentries entries) number of alias entries. This information appears in the form: port # (active alias entries #/maximum alias entries #). For example, "1(2/10)".
Example
The following example shows basic information about the Node Alias feature:
# show nodealias Max Entries: 0 Active Entries: 0 Purge Time: State: 2 Protocols Enabled: ip, ipv6, ospf, bgp, bootps, bootpc, vrrp, dhcps, dhcpc, bpdu, udp, mdns, llmnr, ssdp, Ports Enabled: Shown in parentheses are the active # and maximum # aliases on the port.
History
This command was first available in ExtremeXOS 22.2.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.