show inline-power stats ports
Description
Displays inline power statistics for the specified ports.
Syntax Description
port_list | Specifies one or more slots and ports. If you do not specify ports, information for all ports appear. |
Default
N/A.
Usage Guidelines
-
State—Displays the port power state:
-
Disabled.
-
Searching.
-
Delivering.
-
Faulted.
-
Disconnected.
-
Other.
-
Denied.
-
-
PD‘s power class—Displays the class type of the connected PD:
-
“-----”: disabled or searching.
-
“class0”: class 0 device.
-
“class1”: class 1 device.
-
“class2”: class 2 device.
-
“class3”: class 3 device.
-
“class4”: class 4 device.
-
-
Absent—Displays the number of times the port was disconnected.
-
InvSig—Displays the number of times the port had an invalid signature.
-
Denied—Displays the number of times the port was denied.
-
Over-current—Displays the number of times the port entered an overcurrent state.
-
Short—Displays the number of times the port entered undercurrent state.
Example
The following command displays inline power configuration information for ports 1 to 10 in node (slot) 3 on a SummitStack:
show inline-power stats ports 3:1-10
Following is sample output from this command:
STATISTICS COUNTERS Port State Class Absent InvSig Denied OverCurrent Short 3:1 delivering class3 0 0 0 18 0 3:2 delivering class3 0 0 0 0 0 3:3 searching class0 0 0 0 0 0 3:4 searching class0 0 0 0 0 0 3:5 searching class0 0 0 0 0 0 3:6 searching class0 0 0 0 0 0 3:7 searching class0 0 0 0 0 0 3:8 searching class0 0 0 0 0 0 3:9 searching class0 0 0 0 0 0 3:10 searching class0 0 0 0 0 0
History
This command was first available in ExtremeXOS 11.1.
Platform Availability
This command is available on the PoE devices listed in Extreme Networks PoE Devices.