configure bootprelay delete
Description
Removes one or all IP destination addresses for forwarding BOOTP packets.
Syntax Description
| ipv4 | DHCPv4 BOOTP Relay service (default). |
| ipv6 | DHCPv6 BOOTP relay service. |
| ip_address | Specifies an IP address. |
| all | Specifies all IP address entries. |
| vrid | Specifies a VR or VRF name. |
Default
If you do not specify a VR, the current VR context is used.
If you do not specify DHCPv4 or v6 BOOTP Relay service, DHCPv4 is used.
Usage Guidelines
None.
Example
The following command removes the destination address:
configure bootprelay delete 123.45.67.8
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.