enable mld ssm-map

enable mld ssm-map {{vr} vr_name}

Description

Enables MLD SSM mapping on a virtual router (VR).

Syntax Description

vr vr_name Specifies a virtual router name.

Default

Disabled.

Usage Guidelines

Use this command to enable MLD SSM mapping on a VR.

Configure the SSM address range using the configure pim ipv6 ssm range [default | {policy} policy_name] command before you enable SSM Mapping.

Example

The following example enables SSM mapping on VR1:

enable mld ssm-map vr vr1

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the platforms listed for the IPv6 multicast routing feature in the Switch Engine 32.2 Feature License Requirements document.