show inline-power configuration ports
Description
Displays inline power configuration information for the specified ports.
Syntax Description
port_list | Specifies one or more ports. If you do not specify ports, information for all ports appears. |
Default
N/A.
Usage Guidelines
The output displays the following inline power configuration information for the specified
ports:
- Config—Indicates whether the
port is enabled to provide inline power:
- Enabled: The port can provide inline power.
- Disabled: The port cannot provide inline power.
- Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
- Label—Displays a text string, if any, associated with the port.
Example
The following command displays inline power configuration information for ports 1 to 7:
# show inline-power configuration ports 1-7 Port Config Operator Priority Detection Classification Fast Label Limit 1 Enabled 15400 mW Low 802.3af-only 802.3af-high N 2 Enabled 90000 mW Low 802.3af-only 802.3af N 3 Enabled 90000 mW Low 802.3af-only 802.3af N 4 Enabled 90000 mW Low 802.3af-only 802.3af N 5 Enabled 90000 mW Low 802.3af-only 802.3pre-at N 6 Enabled 90000 mW Low 802.3af-only 802.3pre-bt N 7 Enabled 90000 mW Low 802.3af-only 802.3bt-type4 N
History
This command was first available in ExtremeXOS 11.1.
Per-port Fast PoE information was added in ExtremeXOS 31.1.
The 802.3af, 802.3af-high, and 802.3pre-at options were added in ExtremeXOS 31.7.
Platform Availability
This command is available on the PoE devices listed in Extreme Networks PoE Devices.