show vpex ports ecp statistics
Description
Shows bridge port extender (BPE) Edge Control Protocol (ECP) counter information.
Syntax Description
vpex | Specifies Virtual Port Extender (VPEX). |
ports | Specifies the cascade port attached to the BPE. |
port_list | Specifies the cascade port attached to the BPE. |
ecp | Edge Control Protocol. |
statistics | Specifies showing ECP counter information. |
Default
If you do not specify any ports, information for all cascade ports appears.
Example
The following example shows ECP counter information for BPEs attached to all cascade ports. In this case, there is only one attached BPE on cascade port 1:47:
# show vpex ports ecp statistics Port RxPkt RxAck RxReq RxSeq TxPkt TxAck TxReq TxSeq RxErr TxErr =========================================================================== 1:47 52 0 0 590 52 26 26 26 0 0 =========================================================================== Flags : (*) Active, (!) Administratively disabled, (A) Auto-calculated timer value
History
This command was first available in ExtremeXOS 22.5.
Platform Availability
This command is available on ExtremeSwitching 5420 and 5520 series switches.