Adds a filter to a filter profile.
|hex_profile_name||Specifies the filter profile that the current filter is added to. The value is to be supplied as a colon separated string of hex octets.|
|profile_name||Specifies the filter profile that the current filter is added to in ASCII format.|
|object identifier||Specifies a MIB subtree.|
|subtree_mask||Specifies a hex octet string used to mask the subtree. For example, f7a indicates 126.96.36.199.0.1.1.1.188.8.131.52.|
|included||Specifies that the MIB subtree defined by object identifier/mask is to be included.|
|excluded||Specifies that the MIB subtree defined by object identifier/mask is to be excluded.|
|volatile||Specifies volatile storage.|
mask value—empty string (all 1s).
Use this command to create a filter entry in the snmpNotifyFilterTable. Each filter includes or excludes a portion of the MIB. Multiple filter entries comprise a filter profile that can eventually be associated with a target address. Other commands are used to associate a filter profile with a parameter name, and the parameter name with a target address.
This command can be used multiple times to configure the exact filter profile desired.
The following command adds a filter to the filter profile prof1 that includes the MIB subtree 184.108.40.206.4.1/f0:
configure snmpv3 add filter prof1 subtree 220.127.116.11.4.1/f0 type included
This command was first available in ExtremeXOS 10.1.
The hex_profile_name parameter was added in ExtremeXOS 11.0.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.