show mvrp tag
Description
Shows the port specific applicant and registrar states and the configured control values for all MVRP enabled ports.
Syntax Description
mvrp | Multiple VLAN Registration Protocol. |
tag | The 802.1Q VLAN ID. |
vlan_tag | VLAN ID ranging from 1 to 4094 (default is 2). |
port_list | Port list separated by comma or "-". |
Default
N/A.
Usage Guidelines
Use this command to show the port specific applicant and registrar states and the configured control values for all MVRP enabled ports. The registrar control value is derived as follows:- Normal = Dynamically ordered port.
- Fixed = Statically added port.
- Forbidden = VLAN is configured to be forbidden on the port.
Example
# show mvrp tag 2 Port Applicant Applicant Registrar Registrar State Control State Control ----- --------- --------- --------- --------- 9 VN On MT Normal 11 QA On IN Normal 13 QA On IN Normal Applicant States: AA : Anxious active, AN : Anxious new, AO : Anxious observer, AP : Anxious passive, LA : Leaving active, LO : Leaving observer, QA : Quiet active, QO : Quiet observer, QP : Quiet passive, VN : Very anxious new, VO : Very anxious observer, VP : Very anxious passive Registrar States: IN : In – Registered, LV : Leaving - Timing out, MT : Empty - Not Registered Applicant Control: On : Transmit On, Off : Transmit Off Registrant Control: Fixed : Statically added, Forbidden : Forbidden VLAN, Normal : Dynamically added
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.