Adds a notification log.
|name||Specifies the name of the log.|
|hex||Provide value in hexadecimal.|
|hex_name||Name of the log in hexadecimal.|
|user||Name of the SNMP user on whose behalf the log should be created.|
|snmp_user_name||SNMP user name in ASCII..|
|hex_snmp_user_name||SNMP user name in hexadecimal.|
|sec-model||Security framework associated with the user.|
|sec-level||Authentication and privacy levels of the user.|
Use this command to add a notification log. All entries in the log and its configuration are removed when this command is successfuly executed.
The following example adds nmslog1:
configure snmp add notification log nmslog1 user admin sec-model usm sec-level priv
This command was first available in ExtremeXOS 15.5.
The hex keyword, hex_name variable, and hex_snmp_user_name variable were added in ExtremeXOS 15.6.
This command is available on ExtremeSwitching 5320, 5420, 5520, and 5720 series switches.